Author Topic: Cutters bolts wanted. (Read 21050 times)

Cutter · « **Reply #80 on:** June 15, 2019, 09:55:31 AM »

The bolt pieces are back from the lathe shop. I have 200 assemblies. I am keeping 48, leaving 152 for sale. 48 will give me 32 after giving Cutter 16 for the mill work. As far as the ejectors, firing pins and firing pin springs I think we can each get our own. I seem to recall Cutter had a part # from a spring house for the firing pin spring. The ejectors and springs are available from many suppliers. The firing pins I believe are just .060 piercing punches from McMaster Carr. The firing pin springs might be cheaper in bulk. Any thoughts Cutter?

The Ruger style extractors must be made, not available anywhere.

I have a .DXF sketch for the extractor.

Iâ€™ll get a price for springs & things

gbull · « **Reply #81 on:** June 15, 2019, 04:48:25 PM »

The Ruger style extractors must be made, not available anywhere.

I have a .DXF sketch for the extractor.

Iâ€™ll get a price for springs & things

I think I remember a sketch of the ejector a while back. I must have assumed it was the actual Ruger piece. Glad I didnâ€™t stock up ahead of time.

Cutter · « **Reply #82 on:** June 15, 2019, 07:05:58 PM »

Hereâ€™s some spring information, big savings

I couldnâ€™t find any savings on firing pin, maybe buy our own.

maccrazy2 · « **Reply #83 on:** June 15, 2019, 11:22:44 PM »

http://shopruger.com/10_22-Extractor/productinfo/60010/\'>http://shopruger.com/10_22-Extractor/productinfo/60010/

These show in stock on the website

gbull · « **Reply #84 on:** June 16, 2019, 02:37:41 AM »

The Ruger style extractors must be made, not available anywhere.

I have a .DXF sketch for the extractor.

Iâ€™ll get a price for springs & things

Could you post the dxf for the ejector. I have a friend with a wire edm. He might be willing to cut some. Did you heat treat them? How about the plunger?

Cutter · « **Reply #85 on:** June 16, 2019, 10:10:05 AM »

http://shopruger.com/10_22-Extractor/productinfo/60010/\'>http://shopruger.com/10_22-Extractor/productinfo/60010/

These show in stock on the website

Chris,

The Ruger extractor will not fit in the RG-G bolt.

I designed one similar to fit, using the same mechanics.

maccrazy2 · « **Reply #86 on:** June 16, 2019, 10:46:46 AM »

Oh, I did not realize it was a custom part. Glad I waited to order some.

Cutter · « **Reply #87 on:** June 16, 2019, 11:09:08 AM »

Could you post the dxf for the ejector. I have a friend with a wire edm. He might be willing to cut some. Did you heat treat them? How about the plunger?

I made these from O1 and hardened at home.

drhardin · « **Reply #88 on:** June 16, 2019, 08:11:56 PM »

After discussion with Cutter I would like 18 bolts if available. That will be 12 for me and 6 for Cutter. Thanks much.

4171 · « **Reply #89 on:** June 16, 2019, 08:41:55 PM »

I need 15 then.

Mike

gbull · « **Reply #90 on:** June 17, 2019, 09:36:03 AM »

As of this morning the total number of bolt assemblies spoken for is at 181. This breaks down to,

Blue dog 30

Maccrazy 45

Cutter 25

4171 15

Drhardin 18

Me 48

It appears that everyone is opting to have cutter do the mill work. If there is anyone else, or any changes we have about a week to decide. The hammer shafts will be back from heat treat by then. I guess the plan would be to send cutter all the parts. He can mill them and then send them on to us individually. Payment should be made to me before I ship. I need to check on shipping charges also. If I have missed anything let me know. I am also looking into getting the ejectors and the two springs we will need. The prices for the springs make sense to buy them in bulk.

Gary

maccrazy2 · « **Reply #91 on:** June 17, 2019, 09:43:31 AM »

Iâ€™ll take 50 total.

Cutter · « **Reply #92 on:** June 17, 2019, 10:10:48 AM »

As of this morning the total number of bolt assemblies spoken for is at 181. This breaks down to,

Blue dog 30

Maccrazy 45

Cutter 25

4171 15

Drhardin 18

Me 48

It appears that everyone is opting to have cutter do the mill work. If there is anyone else, or any changes we have about a week to decide. The hammer shafts will be back from heat treat by then. I guess the plan would be to send cutter all the parts. He can mill them and then send them on to us individually. Payment should be made to me before I ship. I need to check on shipping charges also. If I have missed anything let me know. I am also looking into getting the ejectors and the two springs we will need. The prices for the springs make sense to buy them in bulk.

Gary

I think bruski wanted a set.

Iâ€™ll buy the springs and ship them with the bolts.

drhardin · « **Reply #93 on:** June 17, 2019, 11:33:08 AM »

Really super of you guys doing this for everyone. THANKS!!!!

Cutter · « **Reply #94 on:** June 30, 2019, 06:27:38 PM »

Anyone else want bolts ?

Iâ€™ll give this a couple days before I will buy the extras

gbull · « **Reply #95 on:** July 02, 2019, 01:16:18 AM »

I have contacted everyone, and have received replyâ€™s from everyone except Bluedog. If you see this is messaged you the details for payment and delivery. Let me know if you still want the 2 sets we talked about.

Bluedog · « **Reply #96 on:** July 03, 2019, 02:59:02 PM »

Yes, Iâ€™m still in for 30 as was discussed. Iâ€™ll get payment out by the weekend. Thanks

gbull · « **Reply #97 on:** July 03, 2019, 06:01:44 PM »

Yes, Iâ€™m still in for 30 as was discussed. Iâ€™ll get payment out by the weekend. Thanks

Thanks

gbull · « **Reply #98 on:** July 08, 2019, 12:10:36 AM »

Thanks

Payment received, thanks.

brk · « **Reply #99 on:** August 16, 2019, 10:30:12 PM »

I am a little late to this, any bolt assemblies left? I would be interested in a set of 10 plus a spare or two.

News:

Author Topic: Cutters bolts wanted. (Read 21050 times)