Author Topic: buying rg-g plans????? (Read 4068 times)

joboxxer · « **on:** January 13, 2015, 05:38:21 PM »

So does the guy at rg-g ever call back or answer the phone? I\'d like to buy the plans but I\'m not having much luck. Any suggestions?

Dave · « **Reply #1 on:** January 13, 2015, 06:07:35 PM »

Ive heard that.... I think Cutter may talk with him from time to time. Maybe someone else will chime in....

lb7122 · « **Reply #2 on:** January 14, 2015, 08:59:37 AM »

I had the same problem already 3 to 4 years ago, finally got him and ordered stuff and then only got part of it and no refund, finally got him again after several weeks and he claimed he didn\'t have my address, but weird he had my address to send me part of it. Had to get the AG in my state involved and in no time flat then got my refund on what he said he had but didn\'t supply. The plans also have a lot of mistakes, but most of them are covered on the forum here. I am still using mine or you could have them.

Cutter · « **Reply #3 on:** January 14, 2015, 10:45:01 AM »

Email me,

I\'ll send the plans.

Dennis · « **Reply #4 on:** January 27, 2015, 12:05:57 PM »

I have had the same problem. Been calling him for 3 or 4 days and no answer. Anyone know where I can get a set of plans?

Dave · « **Reply #5 on:** January 27, 2015, 01:45:45 PM »

Dennis, send Cutter a Email

Dennis · « **Reply #6 on:** January 28, 2015, 10:36:35 AM »

I dont have his email address.

Dave · « **Reply #7 on:** January 28, 2015, 06:04:30 PM »

Click on his name, email address is at the bottom of his profile....

Dennis · « **Reply #8 on:** January 29, 2015, 09:26:21 AM »

Dave, first of all thanks for the help. I click on his name or anybodys and I see the overview info but no email address.

ravensrayne · « **Reply #9 on:** January 29, 2015, 06:51:45 PM »

I have the plans, but would like to have the cd with the 3d images of the parts. My luck is no better with contact him. Cutter, do you have the cd available ? Thanks, Tracy

Cutter · « **Reply #10 on:** January 29, 2015, 10:56:40 PM »

Ravensrayne/Tracy

No cd

Good luck with your build

Cutter · « **Reply #11 on:** January 30, 2015, 10:50:59 AM »

Dennis,

I\'ll need your email add.

Dennis · « **Reply #12 on:** January 30, 2015, 10:55:36 AM »

dennis@jptransmission.com Thanks

shred · « **Reply #13 on:** January 31, 2015, 07:11:01 PM »

I have the CD. It\'s OK but not really required IMO.

Dave · « **Reply #14 on:** January 31, 2015, 07:35:26 PM »

I have the CD. It\'s OK but not really required IMO.

I think, if anything.... If your not familiar with the gun, it gives you a better understanding how parts look and fit together...

42rocker · « **Reply #15 on:** January 31, 2015, 10:19:42 PM »

And if nothing else the pics on the 3d cd are just plain cool to view.

Good Luck

Later 42rocker

Cutter · « **Reply #16 on:** February 01, 2015, 01:05:39 PM »

RG-G website has 6 3D images you can copy & paste

Cutter · « **Reply #17 on:** February 04, 2015, 03:44:32 PM »

FILES

Dave · « **Reply #18 on:** February 15, 2015, 10:05:14 AM »

From a new member, Ratt

The guy at rg-g his name is Paul. I talked to him 4 times

last week Feb 2015. He said he was in a plane accident.

He can\'t walk without help. Said he was in hospital for six

months. He is back home now. But since he was away so long

everthing from mail to bills is way behind. But he did send

me prints.But no CD yet. His prints are too large to copy.

I also have the D and E prints also to compare. RATT

ronzo · « **Reply #19 on:** February 16, 2015, 07:07:09 AM »

Wow!

It seems that if it wasn\'t for bad luck he wouldn\'t have any at all. I spoke to him a couple of years ago and as I recall he said he was a geezer like me. He also said he was having a really bad time of it when the ecocomy went south. Seemed like a nice guy. Extremely knowledgeable on the subject. I remember that he said he would be reluctant to sell me the plans if I had no machinibg experience.

How many people would be concerned like that?

Ron

News:

Author Topic: buying rg-g plans????? (Read 4068 times)