Author Topic: Six Shooter (Read 42686 times)

« **Reply #40 on:** October 21, 2012, 11:06:04 PM »

I finished the modified Bolt Extractors this weekend.

I\'ll post a .DXF file in a few days, after I tidy up the drawing.

Thanks for the kudos Bob

[attachment=9315:Finished bolt extractor-id=1040.JPG]

« **Reply #41 on:** October 22, 2012, 05:06:21 PM »

That wraps up the Breech Plate/Bolt Extractor modification.

Thanks to Jeff E and Roller for some ideas.

[attachment=9316:Parrish-id=1041.JPG]

« **Reply #42 on:** October 22, 2012, 05:35:51 PM »

cutter,
Those look great and like they are made from gold. Nice work!
bruski

« **Reply #43 on:** October 23, 2012, 11:17:52 AM »

When converting to .DXF the hidden lines became solid.
Also the pin, in green is not rotated. But it\'s an easy read.

Thanks Bruski
Jerry

« **Reply #44 on:** November 12, 2012, 12:09:15 PM »

I like Jeff E\'s approach doing the side rails, so

I\'m giving this a try for the Six Shooters

[attachment=9317:Rails-id=1059.jpg]

« **Reply #45 on:** November 12, 2012, 12:45:54 PM »

Did mine in a similar fashion but from three pieces to save material. Oscillator Base is lapped over and pinned into Side Rails before soldering.

gary

« **Reply #46 on:** November 12, 2012, 01:50:03 PM »

Jerry,

Don\'t forget to make a few extras!!

Bob

« **Reply #47 on:** November 20, 2012, 11:54:03 PM »

Almost finished machining the rails.

Progress picture

Have a great Thanksgiving everyone

Jerry/Cutter

[attachment=9318:MVC-007F-id=1079.JPG]

« **Reply #48 on:** November 22, 2012, 01:11:13 AM »

Cutter,
Looking good!
Have a Happy Thanksgiving!

Mike

« **Reply #49 on:** November 24, 2012, 12:08:20 PM »

Progress on black Friday

[attachment=9319:MVC-011F-id=1091.JPG]

« **Reply #50 on:** November 24, 2012, 04:47:23 PM »

cutter,
Did you machine those out of a piece of thick walled tubing? They look great by the way.
bruski

« **Reply #51 on:** November 24, 2012, 06:03:43 PM »

Cutter,
Very Nice!

Mike

« **Reply #52 on:** November 25, 2012, 11:32:30 AM »

Bruski,

I started with two rectangle pieces 2.500 X 4.000 X 6.000

Got two pieces from each brick.

A band saw got rid of most material.

Thanks guys

[attachment=9320:MVI_0087-id=1093.AVI]

« **Reply #53 on:** November 30, 2012, 04:58:57 PM »

Finished and mounted the Rails this week.

Taken apart for deburring

[attachment=9321:MVC-004F-id=1095.JPG]

« **Reply #54 on:** December 04, 2012, 09:10:13 PM »

This is my setup for the Six Shooters.

[attachment=9322:MVC-009F-id=1100.JPG]

« **Reply #55 on:** December 05, 2012, 03:38:46 PM »

Cutter,
Those are nice. You can mount all three on the same carriage with a shaft extension between them and turn one crank to operate all three at the same time if needed on 12/21/12 when the world ends.

bruski

« **Reply #56 on:** December 05, 2012, 07:11:23 PM »

Anybody know what time and which time zone the end of the world occurs at?

I would like to plan my spending up to the last minute or so.

nitewatchman

« **Reply #57 on:** December 05, 2012, 08:35:12 PM »

I checked my calendar Gary, you get the last post

[attachment=9323:IMG_0088-id=1101.JPG]

« **Reply #58 on:** December 05, 2012, 11:01:54 PM »

12/21/12,
For those of you that will be departing this world in two weeks, may I have all your left behind tools?
McKuhen.

« **Reply #59 on:** December 06, 2012, 02:28:26 PM »

You guys are too much. :lol:

bruski

News:

Author Topic: Six Shooter (Read 42686 times)