Author Topic: Rat Gat (Read 61403 times)

« **Reply #40 on:** February 24, 2014, 08:48:11 PM »

Very Interesting, cutter you do great work.

Later 42rocker

« **Reply #41 on:** February 25, 2014, 01:15:55 PM »

The cartridges is loaded as per Accles patent specification in opening ( f ) very easy.
I\'m going to build one for the six barrel Rat Gat, but I think a 10 barrel version would be smother operating.

« **Reply #42 on:** February 25, 2014, 01:54:05 PM »

It will spit\'em out as fast as you turn

« **Reply #43 on:** February 25, 2014, 05:05:50 PM »

Cutter,

Thanks for the videos. They really make understanding of the operation very clear. Great craftsmanship as always.

Jeff

« **Reply #44 on:** April 19, 2014, 04:58:02 PM »

I received the material for the Rat Bolts Friday.
Starting with 1-1/4 diameter for the follower.
The body will be .875 diameter.

« **Reply #45 on:** April 20, 2014, 10:19:00 AM »

Wow They look big. Hope to see a few pics as it happens.

Later 42rocker

« **Reply #46 on:** April 26, 2014, 11:13:27 AM »

Bolts cut to length ( 5.175 ) and fit in the carrier.

If a picture is worth a 1000 words, what\'s a 3D picture worth ?

« **Reply #47 on:** April 27, 2014, 09:35:42 AM »

Wow Looks Nice and also Big.

Later 42rocker

« **Reply #48 on:** April 27, 2014, 06:51:10 PM »

Back in the beginning of this thread, you were going to use 10-22 stock bolts. I am assuming you changed your mind?

« **Reply #49 on:** April 28, 2014, 02:06:50 PM »

Sparky,
You are correct, that was March 2012.
I just wasn\'t able to put that together with a legal trigger system.
I\'ll be using the RG-G method
Still using stock extractors, firing pins, and related hardware.
Also 6 barrels instead of 5.

« **Reply #50 on:** April 28, 2014, 02:06:50 PM »

Sparky,
You are correct, that was March 2012.
I just wasn\'t able to put that together with a legal trigger system.
I\'ll be using the RG-G method
Still using stock extractors, firing pins, and related hardware.
Also 6 barrels instead of 5.

« **Reply #51 on:** May 02, 2014, 12:37:28 PM »

How about that double post, must be my trigger finger.

Moving on, just finished cutting the follows on the big-ass bolts.

« **Reply #52 on:** May 09, 2014, 07:44:48 PM »

I finished the bolts this week, fit with stock Ruger
firing pins and springs, extractors with springs and plungers.

Next, a month of honey-do\'s

« **Reply #53 on:** June 12, 2014, 10:09:10 AM »

Here\'s a model of the Pan with drive gear for the magazine.
Should see the material today.

« **Reply #54 on:** June 12, 2014, 02:46:48 PM »

Are the gear teeth to drive the Accles drum? I have been hoping to see what you have come up with since you posted the videos of the prototype.

« **Reply #55 on:** June 13, 2014, 10:08:48 AM »

Yes gbull,
This is what I have planned, but probably more changes.

« **Reply #56 on:** June 19, 2014, 01:21:27 PM »

I decided to make the pan in three pieces just in case
I want to change the gearing.

« **Reply #57 on:** June 21, 2014, 09:09:24 AM »

A couple more pictures.
I\'m not sure about the frame yet, rail or tube.

« **Reply #58 on:** June 24, 2014, 11:20:29 AM »

The Rat Gat is getting a tube frame.

« **Reply #59 on:** June 26, 2014, 10:28:42 AM »

The frame tubing came in last night, from onlinemetals.
They\'ve always been efficient.

News:

Author Topic: Rat Gat (Read 61403 times)