Author Topic: Test firing going \'ok\'  (Read 1541 times)

  • Guest
Test firing going \'ok\'
« on: March 31, 2010, 01:17:25 AM »
Note to self, get more ammo. These Gatling Guns are addictive.


Ran a few rounds thru today. Off and on feeding problems(as one would expect). I\'m using the stick mags first.


Solid hits with the firing pins, no misfires.
Extractors working good, one failure to extract, looks like a chamber/breech hang-up.

Started with one bullet to see if 3 sheets of plywood would be a good enough backstop.
Yes 3 sheets is enough, but not for 10 barrels worth in the same spot.  :roll:


Maybe I\'ll try more rounds... Mag wasn\'t tight.


Let\'s try it again. Tightened mag screw.


I thought there were more rounds in the mag than that.

Yup, there\'s a couple.
Got to watch out for those 10 barrels, never know how many are left loaded.

Stock up on ammo.

  • Guest
Test firing going \'ok\'
« Reply #1 on: December 22, 2010, 04:19:57 PM »
Good stuff. Did it need much cleanly afterwards? I\'m dreading having to trouble shoot mine. No pun intended. ;-)