extractor detail

can anyone help with close up photos and size/mouning details of ejector for .22 rg gun thanks.

You have extractor written in the subject line and ejector in the body. Since they are different which one are you needing help on?

Hi, im after ejecter detail
as the fired case leaves the gun to be dumped on the ground. not the extractor details on the 10 bolts. sorry for the stuff up.

The only ejector is the angle piece that goes in the hinged top cover. It should be listed on your set of plans. It kicks the fired cartridge out the slot in the side of the top cover. It is kinda of a trial and error type of piece, I slotted the holes in the angle piece so it would move back and forth to aline it with the slot in the bolt carrier. The plans, or at least the set I have does not go into much detail in the piece, I made one and held it in place with a small clamp to fit it correctly then drilled the holes for the screws once I had the necessary clearance.

thanks for the photo and help. i will try making the part tomorrow.