Author Topic: D&E build  (Read 5727 times)

Offline Hittman

  • Newbie
  • *
  • Posts: 5
D&E build
« on: March 02, 2024, 04:57:21 PM »
Is there any one on this forum building or ave built the D&E gun to date thanks would like to hear from someone

Offline Roller

  • Full Member
  • ***
  • Posts: 162
Re: D&E build
« Reply #1 on: March 09, 2024, 03:59:46 PM »
I built the D&E several years ago and made a YouTube video of it.  There were many discussions in past posts of all the problems with the design.  Review the posts to answer some of your questions.  I haven't been on this site in a while and just happened to see your post. 

Frank

Offline Hittman

  • Newbie
  • *
  • Posts: 5
Re: D&E build
« Reply #2 on: March 10, 2024, 11:44:08 AM »
Thanks fir replying roller i would sure like to be able to talk with you about your experience with the build if you would it would be greatly appreciated you can contact me at dinhitt@gmail.com  or call 360 770 3289 iam readying all the coments here and gathering materials and would just like to talk a little bit about your build thanks hope to hear from you

Offline Hittman

  • Newbie
  • *
  • Posts: 5
Re: D&E build
« Reply #3 on: March 10, 2024, 12:13:15 PM »
The e mail roller I noticed is wrong its donhitt@gmail.com i did see your you tube video amazing work

Offline Dick

  • Newbie
  • *
  • Posts: 1
Re: D&E build
« Reply #4 on: October 22, 2024, 08:40:31 AM »
Hello

I'm started 2007 to bild the D&E Gatling. I came to a point where I found parts which I I had no idee how to build. So in 2009 I stopped the project.
Since 2023 I'm retired and I restarted this project (between a lot of others  :)  ).
First of all I redraw all the drawings from D&E in 3d and converted them from imperial to metric. With this work I got some ideas how I could manufacture some of the parts, e.g. GG22127.
At the moment I have to build a ball turning tool. I need it to build the elevating screw.

Richard