Author Topic: 32 cal D&E  (Read 3499 times)

Offline 7farmer7

  • Newbie
  • *
  • Posts: 0
32 cal D&E
« on: December 11, 2015, 12:14:28 AM »

Frank,


Here is a picture of my 1.5 sized project. What you see in the background is the reason I am so slow at getting this posted for you! Well at least I thought I could do it???


« Last Edit: December 12, 2015, 12:37:33 PM by Dave »

Offline 7farmer7

  • Newbie
  • *
  • Posts: 0
32 cal D&E
« Reply #1 on: December 11, 2015, 10:08:23 AM »
Sorry folks I have tried everything I can think of and have not been able to get a picture to post. I am going to tear it apart and start a rebuild with a different carrier & bolts than the plans. Try to get closer to an original on the internal workings.

Offline Dave

  • Site Admin
  • Administrator
  • Hero Member
  • *****
  • Posts: 860
32 cal D&E
« Reply #2 on: December 12, 2015, 12:38:04 PM »

Pics added, NICE GUN!



Offline Cutter

  • Hero Member
  • *****
  • Posts: 1174
32 cal D&E
« Reply #3 on: December 12, 2015, 01:03:18 PM »
Great look !
Is that a disk blade it\'s on ?
Very nice

Offline 4171

  • Newbie
  • *
  • Posts: 124
32 cal D&E
« Reply #4 on: December 12, 2015, 02:43:14 PM »

Very nice! You gonna mount that on the combine? lol


Mike



Offline 4171

  • Newbie
  • *
  • Posts: 124
32 cal D&E
« Reply #5 on: December 12, 2015, 02:45:49 PM »

Glad I\'m not the only one that can\'t figure out how to post pictures :???:



Offline Roller

  • Full Member
  • ***
  • Posts: 162
32 cal D&E
« Reply #6 on: December 12, 2015, 07:04:30 PM »

Very nice!  Excellent job.  Want to hear more details of your build!


 


Frank



Offline 7farmer7

  • Newbie
  • *
  • Posts: 0
32 cal D&E
« Reply #7 on: December 13, 2015, 10:31:32 AM »
It is actually mounted on an old variable speed combine hub. The CH Gleaner combine had a variable speed and the hub was solid brass so I just shaped the brass hub and used the sheave for a base. These combines were sitting in junkyards all over the country till the high scrap prices. These hubs make good project stands. Thanks Dave for putting my pictures up for me! Hoping to start internal rebuild when combine is done and Christmas fun is done.

Offline Dave

  • Site Admin
  • Administrator
  • Hero Member
  • *****
  • Posts: 860
32 cal D&E
« Reply #8 on: December 13, 2015, 12:15:25 PM »


Glad I\'m not the only one that can\'t figure out how to post pictures :???:




I will do a how to on it later today and post it in General, you can mail them to me also and I will take care of it too


Offline 7farmer7

  • Newbie
  • *
  • Posts: 0
32 cal D&E
« Reply #9 on: December 14, 2015, 11:59:20 PM »
Looked at a Sako style extractor today. I feel it could be made to work fairly simply but am a little concerned it may hang on to cartridge a little to tight. I have never been able to see in my mind how these things get the empties to clear out without jamming things up. Frank I spotted your project yesterday...wow....to be able to build something that nice is a gift...Very nice! When you got it to fire did the spent casings clear out the way they were supposed to? I confess I built a RGG Gatling 1st and it works but extraction is tricky on it also. It\'s all more fun than working on combines though.

Offline Roller

  • Full Member
  • ***
  • Posts: 162
32 cal D&E
« Reply #10 on: December 16, 2015, 07:03:45 PM »

Yes the extractor worked very well, unfortunately the strength of it leaves much to be desired.  It works well because gravity drops the casing out the bottom of the gun, no ejector needed.


 


Frank


« Last Edit: December 16, 2015, 07:05:48 PM by Roller »