« previous next »
Pages: [1]

Author Topic: My Gatling Progress.  (Read 4728 times)

  • Guest
My Gatling Progress.
« on: November 23, 2010, 09:08:40 AM »

I have been working on and off on my Gun for over a year now and thought it was time time to post some photos. More to follow.

Thanks for looking.


 


[attachment=9232:gatling gun 031-id=324.jpg]


 


[attachment=9231:barrells 014-id=325.jpg]


 


[attachment=9233:gatling gun 021-id=323.jpg]


 


[attachment=9234:gatling gun 011-id=322.jpg]


« Last Edit: December 23, 2014, 07:29:31 PM by Dave »
Logged

cutter

  • Guest
My Gatling Progress.
« Reply #1 on: November 26, 2010, 10:51:10 AM »
Thanks for pictures Mike.
We need more members to show their progress.
It\'s always inspiring to see more action.
Logged

  • Guest
My Gatling Progress.
« Reply #2 on: November 27, 2010, 04:42:13 AM »
Looks great. I need to get working on mine again. Thanks for inspiring me!
Logged

Offline Dave

  • Site Admin
  • Administrator
  • Hero Member
  • *****
  • Posts: 860
My Gatling Progress.
« Reply #3 on: December 04, 2010, 03:25:56 PM »
Looks good, keep us posted!
Logged

  • Guest
My Gatling Progress.
« Reply #4 on: February 21, 2011, 07:50:53 AM »

Had a little extra time this weekend and was able to get the main shaft made.


 


[attachment=9236:gatling 009-id=405.jpg]


 


[attachment=9238:gatling 008-id=404.jpg]


 


[attachment=9237:gatling 002-id=403.jpg]


« Last Edit: December 23, 2014, 07:30:51 PM by Dave »
Logged

  • Guest
My Gatling Progress.
« Reply #5 on: February 21, 2011, 09:01:13 AM »
Your work looks Great!  Question: When cutting the main shaft to lenght, did you mesure it with a scale or do you have calipers that big? I plain to do my main shaft next I\'ll have to use a large scale on it and cut it as close as I can!  Also, post some pics of your equiptment in the Equiptment forum? It\'s allways good to see what other people are making their parts on.
Thanks
R-R
Logged

  • Guest
My Gatling Progress.
« Reply #6 on: February 21, 2011, 12:31:19 PM »
Actually I used a tape measure. I don\'t beleave the overall length is that critical. I ended up with it about 1/16\" over 20\". I can always shorten it a bit later if needed.

Mike
Logged

  • Guest
My Gatling Progress.
« Reply #7 on: February 23, 2011, 02:42:23 PM »
HI,
 There is a Guns & Ammo magazine out with a 1873 gatling gun featured.
It has a hinged front cover plate. It looks just like the cover picture that is on this forum.
Logged

  • Guest
My Gatling Progress.
« Reply #8 on: March 07, 2011, 08:13:04 AM »

A few more.


 


[attachment=9239:gatling 022-id=420.jpg]


 


[attachment=9240:gatling 015-id=419.jpg]


« Last Edit: December 23, 2014, 07:31:47 PM by Dave »
Logged

Offline Dave

  • Site Admin
  • Administrator
  • Hero Member
  • *****
  • Posts: 860
My Gatling Progress.
« Reply #9 on: March 18, 2011, 03:09:57 PM »
Looks good! But how are you going to attach the steel rails to the housing (assuming the housing is brass)?
Logged

  • Guest
My Gatling Progress.
« Reply #10 on: March 19, 2011, 07:55:18 AM »
I was planning on silver solder as well as the screws that go thru to the cam.
Logged

  • Guest
My Gatling Progress.
« Reply #11 on: March 20, 2011, 03:58:05 PM »

Worked on box cam today, still have some file work to finish it up.


Mike


 


[attachment=9241:cam4-id=460.jpg]


 


[attachment=9242:cam10-id=459.jpg]


 


[attachment=9243:cam12-id=458.jpg]


« Last Edit: December 23, 2014, 07:33:04 PM by Dave »
Logged

  • Guest
My Gatling Progress.
« Reply #12 on: June 15, 2011, 07:11:00 PM »
Nice work.  :)

I have never seen an adjustable mandrel that big before.
Logged

  • Guest
My Gatling Progress.
« Reply #13 on: June 15, 2011, 07:30:32 PM »
It is a KO Lee. Comes in handy sometimes. I made a sacraficial aluminum sleeve to protect it.
Logged

  • Guest
My Gatling Progress.
« Reply #14 on: October 17, 2011, 08:14:34 AM »

Finally had a little time to get back to the Gat Gun. Roughed out the bolts.


 


[attachment=9244:bolts 006-id=558.jpg]


 


[attachment=9245:bolts 004-id=557.jpg]


« Last Edit: December 23, 2014, 07:33:53 PM by Dave »
Logged

  • Guest
My Gatling Progress.
« Reply #15 on: November 15, 2013, 08:17:51 PM »
When I view nice work like this and then look at the last time this person was here I have to guess about what happened.
I hope that sometime I get to see posts of more of this build and or what happened.
Hope that he was able to finish it.
Anyone out there know??

Later 42rocker
Logged
Pages: [1]
« previous next »