Author Topic: New Bolts  (Read 12758 times)

Offline 4171

  • Newbie
  • *
  • Posts: 124
New Bolts
« Reply #60 on: July 16, 2019, 11:23:28 PM »
I would be in for extractors too. I’m not sure but I think the spring and plunger is a stock Ruger part.

Mike

Offline gbull

  • Newbie
  • *
  • Posts: 52
New Bolts
« Reply #61 on: July 17, 2019, 12:34:55 AM »
They may be, but in bulk the springs are probably only a buck, and the plunger is really a simple turning job.

Offline drhardin

  • Global Moderator
  • Full Member
  • *****
  • Posts: 136
New Bolts
« Reply #62 on: July 17, 2019, 07:43:02 AM »

I am in for the extractors and springs. I have a complete gun which I built using Cutters bolts with the RGG extractors. Thinking how we could use it to test functionality. 



Offline gbull

  • Newbie
  • *
  • Posts: 52
New Bolts
« Reply #63 on: July 17, 2019, 10:17:50 AM »
It would need the proper clearance cut in the barrel to clear the roger style extractor. I guess it would depend how clearance you gave your barrels.

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
New Bolts
« Reply #64 on: July 17, 2019, 11:22:31 AM »
In for the springs as well. The plungers would be easy to turn

Offline gbull

  • Newbie
  • *
  • Posts: 52
New Bolts
« Reply #65 on: July 24, 2019, 08:24:03 PM »
So far so good. Now to see how it fits the sample bolt I have. The price should be around $4.10 ea. These are made from cutter’s dxf file. Still need to source the firing pins.

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
New Bolts
« Reply #66 on: July 25, 2019, 09:21:53 AM »
McMaster carr has the mold pins for firing pins

Offline 4171

  • Newbie
  • *
  • Posts: 124
New Bolts
« Reply #67 on: July 25, 2019, 12:39:56 PM »


McMaster carr has the mold pins for firing pins


What is the part number?

Thanks

Mike

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
New Bolts
« Reply #68 on: July 25, 2019, 02:38:31 PM »
I will look tonight. I believe I have it written down at home

Offline gbull

  • Newbie
  • *
  • Posts: 52
New Bolts
« Reply #69 on: July 25, 2019, 03:38:48 PM »
They do have pins. They do need to have the heads ground down on the dia. and thickness. I was hoping to find some with smaller heads.

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
New Bolts
« Reply #70 on: July 25, 2019, 07:53:10 PM »
I have have a toolpost grinder if need be

Offline 4171

  • Newbie
  • *
  • Posts: 124
New Bolts
« Reply #71 on: July 25, 2019, 07:58:22 PM »
Gbull let me know if you find some

Mike

Offline Roller

  • Full Member
  • ***
  • Posts: 162
New Bolts
« Reply #72 on: July 26, 2019, 08:05:59 AM »


They do have pins. They do need to have the heads ground down on the dia. and thickness. I was hoping to find some with smaller heads.




 


 


 


 


Heads on ejector pins and core pins are annealed and can be machined easily.


 


Frank


Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
New Bolts
« Reply #73 on: July 26, 2019, 10:38:49 AM »
This is the measurements I have. I thought I had written down the part number but I seem to remember discussing machining first and buying the pins after to achieve the desired fit.

Offline Cutter

  • Hero Member
  • *****
  • Posts: 1174
New Bolts
« Reply #74 on: July 26, 2019, 11:33:05 AM »
This is what I used, from McMaster-Carr


Offline 4171

  • Newbie
  • *
  • Posts: 124
New Bolts
« Reply #75 on: July 26, 2019, 12:52:39 PM »
Thanks Jerry!👍