Author Topic: RGG Gatling (Read 6357 times)

John K · « **Reply #20 on:** May 01, 2018, 02:09:04 PM »

Cutter, while that is an understandable impression, I don\'t think it is a problem. I drug out a few 22 pistols and took pics of their ejector systems; they all touch the case on the rim.

Actually, I worry a little about lack of a rim recess in either the barrel or the bolt. In the event of a blown case there is no gas handling in place. In a gatling, at least that area isn\'t open near the shooters face.

[attachment=10537:IMG_20180501_125612.jpg] Ruger Mk ii

[attachment=10538:IMG_20180501_125704.jpg] s&w m41

[attachment=10539:IMG_20180501_125728.jpg] High standard supermatic

[attachment=10540:IMG_20180501_125801.jpg] colt huntsman

bruski · « **Reply #21 on:** May 01, 2018, 05:01:54 PM »

John, Are you going to make your bolts 1 piece like the ones cutter made in the link?

http://www.gatlinggunforum.com/forum/index.php?/topic/1369-bolts/\'>http://www.gatlinggunforum.com/forum/index.php?/topic/1369-bolts/

bruski

John K · « **Reply #22 on:** May 01, 2018, 05:10:45 PM »

Probably, just need to cipher out the workholding. Saw his jig for the 4th axis and that looked like a capital idea!

Sparky_NY · « **Reply #23 on:** June 10, 2018, 07:12:25 AM »

Any updates John?

John K · « **Reply #24 on:** June 12, 2018, 10:36:34 AM »

Sparky,

Nothing new. Sadly, other things have intruded on my \"free\" time of late. I have been gathering materials for other versions, including a centerfire.

Sparky_NY · « **Reply #25 on:** June 12, 2018, 12:51:43 PM »

That happens. I am going to start a .38/.357 one very soon, Cutter twisted my arm.

News:

Author Topic: RGG Gatling (Read 6357 times)