Author Topic: Critics wanted  (Read 3086 times)

  • Guest
Critics wanted
« on: April 22, 2014, 11:03:21 AM »

What do you see wrong in this picture ??


 


[attachment=9787:IMG_1663-id=2048.JPG]


« Last Edit: December 26, 2014, 04:36:39 PM by Dave »

  • Guest
Critics wanted
« Reply #1 on: April 23, 2014, 09:10:44 PM »
Are the extractors sticking out too far?

  • Guest
Critics wanted
« Reply #2 on: April 24, 2014, 02:20:05 AM »
To many firing pins sticking out? Or at the same time?

Also looks like one missing bolt?

Later 42rocker

  • Guest
Critics wanted
« Reply #3 on: April 25, 2014, 10:21:31 AM »
Don,
I agree, some look a little long.
I was using the .090 slot for comparison.

Tim,
The firing pins sticking out at different distances
and two look like about .060

  • Guest
Critics wanted
« Reply #4 on: May 02, 2014, 01:58:34 PM »
Another picture

  • Guest
Critics wanted
« Reply #5 on: May 05, 2014, 02:28:19 PM »
Bolt extractor retaining pin detetnt slot is on the wrong side of the back cover. The slot in bolt extractor that lines up with the bolt cam looks messed up.

  • Guest
Critics wanted
« Reply #6 on: May 06, 2014, 08:48:51 PM »

Yep Bzrkr,

Maybe that’s why the bolt extractor looks beat-up.

I didn\'t see anything holding it in.


 



[attachment=9788:IMG_0161-id=2075.JPG]


« Last Edit: December 26, 2014, 04:37:14 PM by Dave »

  • Guest
Critics wanted
« Reply #7 on: May 06, 2014, 10:23:49 PM »
Where did this gun come from?  Are these pictures taken after it was taken apart?

Don

  • Guest
Critics wanted
« Reply #8 on: May 07, 2014, 11:14:20 AM »
Don,
The gun with extra parts was bought at a gun swap-meet a few years ago
in North Dakota. I received it shortly after for evaluation and possible repairs.
Very little could have been salvaged. I returned it as is.
The extractors actually wore small squared corners in the carrier.  
The chambers were bell mouthed .010 , and on and on.  :cry: