Author Topic: Home made aluminum Ruger mark 1 barrel (Read 3342 times)

Dave · « **on:** January 23, 2014, 07:14:12 PM »

I have a old wore out Ruger Mark 1, I bought a Wolf spring kit, a new firing pin and retainer to try and renew it. So I decided to try and make a aluminum barrel for it. The body is 6061 1 inch od and 3/4 id aluminum tube. The actual barrel is 6061 3/4 aluminum rod. The barrel will be around 7 inches long ,drilled and sleeved with a steel barrel liner...

Im going to try and have it done next week. Ready for powder coating anyway...

[attachment=3]gun1.jpg[/attachment]
[attachment=2]gun2.jpg[/attachment]
[attachment=1]gun3.jpg[/attachment]
[attachment=0]gun4.jpg[/attachment]

« **Reply #1 on:** January 24, 2014, 10:56:54 AM »

I had a mark 1 in the 80s, my ex wife took it.
GREAT job Dave

« **Reply #2 on:** January 25, 2014, 01:19:44 PM »

Dave,

Did you get a Tormach 1100?

nitewatchman

Dave · « **Reply #3 on:** January 25, 2014, 04:08:40 PM »

I got a 770, wish I would have got the 1100 :evil:

Dave · « **Reply #4 on:** January 31, 2014, 05:45:33 PM »

Here it is, ready for sandblasting and cerakote... I going to build a muzzle brake to (theres a cap on it now) Seems to shoot good... I put a little stiffer recoil spring in it also.

« **Reply #5 on:** January 31, 2014, 06:12:05 PM »

Very nice job Dave.
bruski

« **Reply #6 on:** January 31, 2014, 06:35:20 PM »

You said that it shoots good.

Well it sure looks good also. Nice Job.

Later 42rocker

News:

Author Topic: Home made aluminum Ruger mark 1 barrel (Read 3342 times)